Updated at: 2022-12-09 03:49:50
To install,
Step 1 Log in to the server and copy the software installation package to the specified location as root user.
Note that this specified location requires that the user of the database or the user of the system restored to has the execution permission to the installation directory.
Step 2 Unpack with gunzip -c packageName | tar -xvf-, for example,
gunzip -c AnyBackupClient-AIX_5.3_power64-7.0.13.0-20190820-release-zh_CN-817.tar.gz | tar -xvf-
Step 3 Enter the software installation directory AnyBackupClient/ClientService, and input the installation command ./install.sh. The installation steps after confirming the copyright information are shown in the following figure.
Mind the following:
§ During the client installation, the installation program will check whether the installation conditions are met. If not, manual adjustment shall be made or auto adjustment shall be selected. After the adjustment completes, the installation job continues.
§ Spaces are not allowed in the installation path.
To install,
Step 1 Input y to confirm the copyright information.
Step 2 Input y to continue the installation.
Step 3 Fill in your own IP address. For a server which has multiple NICs, data can be backed up through the designated NIC, and this IP address will be displayed in the backup server.
Step 4 Fill in the Cluster-VIP address of the backup server.
Step 5 Enter 1 or 2 to select the language (Chinese or English).
Step 6 operator name option can be set as null, press Enter directly.
Note that the name of the operator that has been created on the backup server can also be filled in. The client will be automatically assigned to the operator after the client is successfully installed.
Step 7 Input n for whether to enable SSL.
Step 8 Input y for whether to support other database types, because Oracle databases shall be supported.
Step 9 Input 1 indicates to select oracle database, and input q indicates to exit. Here input 1.
Step 10 Input the username supported by the selected oracle database, and fill in the username of the client oracle database.
Input oracle here.
Step 11 For whether to support other database types, input n if oracle backup and recovery for multi-user is not needed. Vice Versa, input y if oracle backup and recovery is needed for all users under Oracle environment. The remaining steps are the same as Step 9 and Step 10.
Step 12 Input y to start installation.
After installation completes, enter the console as a system administrator and the related IP can be viewed in Resources > Client > External Client. If the status is online, the installation succeeds.
Step 1 Log in to the server and copy the software installation package to the specified location as root user.
Note that this specified location requires that the user of the database or the user of the system restored to has the execution permission to the installation directory.
Step 2 Unpack with gunzip -c packageName | tar -xvf-, for example,
gunzip -c AnyBackupClient-AIX_5.3_power64-7.0.13.0-20190820-release-zh_CN-817.tar.gz | tar -xvf-
Step 3 Enter the software installation directory AnyBackupClient/ClientService, and input the installation command ./install.sh. The installation steps after confirming the copyright information are shown in the following figure.
Mind the following:
§ During the client installation, the installation program will check whether the installation conditions are met. If not, manual adjustment shall be made or auto adjustment shall be selected. After the adjustment completes, the installation job continues.
§ Spaces are not allowed in the installation path.
To install,
Step 1 Input y to confirm the copyright information.
Step 2 Input y to continue the installation.
Step 3 Fill in your own IP address. For a server which has multiple NICs, data can be backed up through the designated NIC, and this IP address will be displayed in the backup server.
Step 4 Fill in the Cluster-VIP address of the backup server.
Step 5 Enter 1 or 2 to select the language (Chinese or English).
Step 6 operator name option can be set as null, press Enter directly.
Note that the name of the operator that has been created on the backup server can also be filled in. The client will be automatically assigned to the operator after the client is successfully installed.
Step 7 Input n for whether to enable SSL.
Step 8 Input y for whether to support other database types, because Oracle databases shall be supported.
Step 9 Input 1 indicates to select oracle database, and input q indicates to exit. Here input 1.
Step 10 Input the username supported by the selected oracle database, and fill in the username of the client oracle database.
Input oracle here.
Step 11 For whether to support other database types, input n if oracle backup and recovery for multi-user is not needed. Vice Versa, input y if oracle backup and recovery is needed for all users under Oracle environment. The remaining steps are the same as Step 9 and Step 10.
Step 12 Input y to start installation.
After installation completes, enter the console as a system administrator and the related IP can be viewed in Resources > Client > External Client. If the status is online, the installation succeeds.
< Previous:
Next: >